All posts by Joe Welder

NORSTAR N810006 TROJAN SPOOLGUN HOBART ( HANDLER KIT)

NORSTAR N810006  TROJAN SPOOLGUN  HOBART  

INCLUDES KIT TO INSTALL ON HANDLER 135-140-175 & 180

 

MILLER/HOBART SPOOLGUN SWITCH KIT -SPOOLRUNNER 100 FOR HANDLER 135-175-140-180

 

 

Items need to hook up Hobart Spoolrunner 100 to Hobart Handler 135 , 140, 175 & 180 ( only)

 

Will not work on Handler 187

 

 

 

 

NORSTAR SPOOLGUN FOR HOBART HANDLER  

W / 1 LB SPOOL OF ALUMINUM WIRE

 

 

 

Features:

  • Weld aluminum, steel or stainless steel
  • .030″ – .035″ drive rolls
  • Standard M-10 style consumables
  • Uses standard 4″ wire spools

 

 

Items need to hook up Hobart Handler 135 , 140 , 180 & 175 ( only)

Will not work on Handler 187

 

 

 

REMOVE handler COVER 

UNPLUG THE DRIVE MOTOR FROM THE PC BOARD 

take out the black trigger plug  ( where the 2 spade connectors from the mig gun trigger plug in 

and put the switch there 

DRILL A HOLE FOR THE 4 pin receptacle ( sometimes behind the front cover there is a hole blocked off by the front nameplate )

INSTALL THE NEW CORD ON YOUR MIG GUN  

THE TWO WIRES THAT WERE IN THE BACK OF THE BLACK TRIGGER PLUG , INSTALL THE NEW PINS ON THESE WIRES AND INSTALL IN PINS 1 & 2 ON THE 4 PIN RECEPTACLE

 

PLUG IN THE WHITE PLUGS ON THE SWITCH INTO THE PC BOARD AND THE DRIVE MOTOR PLUG

PLUG IN THE RED AND BLACK WIRES INTO THE EMPTY 2 PINS ON THE 4 PIN TRIGGER RECEPTACLE ( pins 3 & 4)

IF THE SPOOLGUN RUNS BACKWARDS REVERSE THE RED AND BLACK WIRES ON THE SWITCH( NOT THE 4 PIN RECEPTACLE)

THIS IS NOT A MILLER SWITCH

 . If your  Serial# is LC175022 and above ( with the 2 pin square drive motor plugs)
the switch plugs into the harness . If it is a lower serial number , you have to do some wiring , but not hard to do)

 

purchase here

 

 

 

 

 

 

 

 

 

 

 

 

   

 

NORSTAR M200i-M INVERTER MIG WELDER 120/230 VOLT

NORSTAR M200i-M INVERTER MIG WELDER 120/230 VOLT

NORSTAR 120-230 VOLT MIG WELDER INVERTER

LIGHTER AND MORE POWERFUL MIG

UP TO 200 AMPS ON 230 VOLTS

WELDS SHEET METAL TO 3/8″

ADD A SPOOLGUN  FOR $ 94

PRICE ON THIS WELDER $ 649

BUY HERE

 

NORSTAR M200M-I Mig Welder 200 Amp 115V / 230V Mig / Flux Welder Package N810200M-I

The Norstar Mig M200-M Inverter welding machine is able to complete the toughest jobs with ease and is Spool Gun Ready! The M200-M Mig welder incorporates all the features and benefits of major brand Mig welders featuring:

  • Spool Gun Ready / “Can be added to your order before checkout”
  • 115v./230v Input Power
  • Up to 200 amps DC, Max
  • OC Voltage 29
  • 25-140amps 115v
  • 25-200 amps 230v
  • MIG and Flux Cored (FCAW) welding process supported
  • Wire feed speed: 45-425 ipm
  • Uses either 4″ or 8″ spools
  • Voltage Compensating Wire feed
  • Tested in USA
  • 3 Year Warranty

Each system includes:

  • M200M-I Mig Welder
  • M-10 style MIG Gun with 10′ cable
  • Miller M-10 style consumables
  • Work Clamp and Cable
  • Regulator flow gauge
  • 2 lb. spool of Inweld ER70S-6 x .030″ welding wire
  • 2 extra welding tips
  • Dual groove drive roll .023″ – .030″
  • Gas solenoid valve (installed)

 

The Norstar M200M-I Dual voltage 115v/230v 1ph. 60Hz.
Mig Welder Package is great for Sheet Metal Shops, Maintenance,
Job Site, Installers, Farms, Auto Enthusiasts or DIY’S.  

 

ALADDIN WELDING PRODUCTS WELDING RODS

80 CF WELDING CYLINDER tank bottle for Argon/75-25/Nitrogen DOT new 10 year

80 CF WELDING CYLINDER tank bottle for Argon/75-25/Nitrogen DOT new 10 year

$ 180.00 free shipping

80 Cubic Foot Inert Gas Cylinder suitable for all inert gases including: Argon(75%)/CO2(25%), Argon or Nitrogen.

Argon/CO2 mix provides superior performance while welding with solid steel MIG wires. Straight Argon is suitable for most TIG applications and aluminum MIG welding.

Nitrogen is used for various industrial applications including HVAC purging and testing.

  • All cylinders are brand new 3AA2015 with ten year test
  • CGA 580 valve

    **NOTE – cylinders must always be used with pressure regulating device

    CYLINDERS CANNOT BE SHIPPED BY “AIR”**

    CYLINDERS ARE NOT RETURNABLE**

purchase here

Norstar N82LTS160 DC LTS160 DC 115/220 volt TIG Welder Package

Norstar N82LTS160 DC LTS160 DC 115/220 volt TIG Welder Package

$ 469.00

160 Amp DC Tig Welder LTS160-DC
Coplay Norstar 115/230 Volt TIG Welding Package

Enjoy all the features and benefits of major brand welders and more with the Coplay Norstar line of welders.

The LTS160-DC TIG and Stick welder includes:

  • Tig 160a DC Welder
  • 12.5″ Series WP17 Torch
  • Work Clamp & Cable
  • Stick Electrode Holder & Cable
  • Input Power Cable
  • Flowgauge Regulator
  • Input Power Adaptor Cable 115/230

Specifications:

  • Tig (GTAW) and Stick (SMAW) Welding 
  • Input 115 /1 50/60 Hz. –  230/1 50/60 Hz.
  • Output DC 5-160amps  
  • OCV: 59V DC Max. 74V
  • Rated Output 140A/15.6v/60% 115V, 160A/18v/60% 230v
  • Dimensions: 14″H x 12″W x 24″D
  • Weight 38 lbs.
  • Note: Not for welding aluminum
  • Remote is $ 124 extra either fingertip or foot control, includes cord adapter

PURCHASE HERE

Blue Demon BlueArc 140MSTI Welder 140 AMP, 120V

Blue Demon BlueArc 140MSTI Welder 140 AMP, 120V

$ 620.00

 

 BlueArc 140MSTI Welder

  • 140 AMP, 120V 
    Includes:
  • MIG Torch
  • Ground Cable
  • Welding Cable
  • TIG Torch
  • Gas Hose
  • Flow Gauge

 

The Blue Demon BlueArc 140MSTI MIG/Stick/TIG Welder is a lightweight,

portable IGBT inverter design that features 140 AMP and 120 input power

that can be used virtually anywhere. The inverter-based system offers increased

power output while maintaining volt compensation for both stick and TIG welding.

The BlueArc 140MSTI features a fan cooled, thermal overload protection, quick connectors,

pressure regulator and torch. It is an ideal unit for welding all sorts of steel,

cast iron and hard surfacing. Spool gun ready (sold separately).

Features:

  • Lift-Arc TIG Mode.
  • Anti-Stick.
  • Thermal Overload Protection.
  • Input Voltage Overload Protection.
  • Line Voltage Compensation. 

    Includes:

  • 10 ft. MIG Torch.
  • 10 ft. Ground Cable, Clamp, Cord.
  • 13 ft. Welding Cable with Electrode Holder.
  • Regulator/Flowgauge.
  • 7.5 ft. TIG Torch
  • 10 ft. Gas Hose.
  • .023/.30 Drive Roller.

 

PURCHASE HERE


Blue Demon BLUEARC160STI STICK AND TIG WELDER

Blue Demon BLUEARC160STI

$ 379.00

The Blue Demon BlueArc 160STI Inverter Stick And TIG Welder features powerful 160 AMP, 110/220V

power that can be used nearly anywhere. The inverter-based system offers increased power output

while maintaining volt compensation for both stick and TIG welding. The BlueArc 160STI features a

digital display, quick connectors, is fan cooled, and includes a pressure regulator and torch.

It is an ideal unit for welding all sorts of carbon steel, stainless steel, cast iron and hard surfacing.

Features:

  • Inverter-Based Stick and TIG Welder.
  • Increased Power Output with Volt Compensation.
  • Extremely Lightweight at only 10.6 Pounds.
  • 160 AMP, Operates on 220V (110-220V).
  • Dimensions: 15″ x 5.9″ x 11.4″.
  • Includes Pressure Regulator and Torch & Case

 

PURCHASE HERE

Blue Demon BLUEARC90STI $ 192

Blue Demon BLUEARC90STI

$ 192.00

 

 

The BlueArc 90STI inverter-based stick welder with TIG option from Blue Demon features powerful 115V inverter technology that can be used practically anywhere. The inverter-based system offers increased power output from a smaller transformer, resulting in an extremely lightweight system that weighs about 50% less than comparably powered traditional models. This machine even includes a shoulder strap for ultimate portability. It is an ideal stick unit for welding all sorts of carbon steel, stainless steel, cast iron and hard surfacing. 
TIG Torch Sold Separately 

 

Features:

  • Inverter-Based Stick Welder with TIG Option.
  • Offers Increased Power Output from a Smaller Transformer.
  • Extremely Lightweight at only 9.9 Pounds.
  • Operates on AC single phase 120V (110-120V).
  • Duty Cycle: 20% at 80A.
  • Dimensions: 12″ x 5″ x 9″.

 

PURCHASE HERE