Category Archives: millermatic 125

Miller Millermatic 125 Hobby MIG Welder 907692

Miller Millermatic 125 Hobby MIG Welder 907692

Built for farm, home and light fabrication applications, the new Millermatic®125 Hobby from Miller Electric Mfg. Co. is an easy-to-use, beginner welder. The MIG and flux-cored-capable Millermatic 125 Hobby works off standard 115 V household power. It MIG welds 24 gauge to 1/8-inch material and welds 18 gauge to 3/16-inch material with flux-cored wire in a single pass. The machine’s simple two-knob design allows for easy setup and use. 

Comes Complete With

  • Millermatic 125 Power Source
  • Power cord with plug
  • 8 ft (2.4m) M-80 MIG gun and cable assembly
  • 8 ft (2.4m) work cable with clamp
  • Smith Argon and AR/CO2 mix regulator/flow gauge and gas hose
  • Two contact tips for .030 in (0.8 mm) wire
  • Quick Select drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 in (0.8/0.9 mm) flux-cored wire
  • Spool of Hobart .030 in solid wire
  • Material thickness gauge
  • Auto-Set automatically provides the right settings to weld mild steel while tapped voltage control allows the flexibility to manually set your own parameters.Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup
    • Turn the wire speed knob to Auto-Set, a blue light shows Auto-Set is activated
    • Dial in the thickness of what you’re welding
    • Start welding with the exact parameters you need
  • Quick Select drive roll makes setup quicker by offering three grooves – two for different size solid wire and a third for flux-cored wire
  • Factory-installed Gas Solenoid makes it easy to switch between MIG welding and flux-cored wire.
  • Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools
  • Uses 4- or 8-inch (102 or 203mm) spools and can be set up to weld with .024-.030 inch (0.6-0.8 mm) solid wire and .030-.035 inch (0.8-0.9 mm) flux-cored wire

purchase here at www.brweldingsupplies.com