NORSTAR BADGER SPOOLGUN N810001 AND SWITCH N890001 FOR MILLERMATIC 135 & 175 MIG WELDERS

NORSTAR BADGER SPOOLGUN N810001 AND SWITCH N890001 FOR MILLERMATIC 135 & 175 MIG WELDERS

$ 149.00

NORSTAR BADGER SPOOLGUN AND SWITCH FOR MILLERMATIC 135 & 175 MIG WELDERS

( SWITCH IS SIMILAR TO A 300409 MILLER )

THIS KIT FITS THESE 2 MODELS 

INSTRUCTIONS ARE INCLUDED

REMOVE MM COVER 

UNPLUG THE DRIVE MOTOR FROM THE PC BOARD 

DRILL A HOLE FOR THE SWITCH INSIDE WHERE SHOWS

PLUG IN THE WHITE PLUGS ON THE SWITCH INTO THE PC BOARD AND THE DRIVE MOTOR PLUG

PLUG IN THE RED AND BLACK WIRES INTO THE EMPTY 2 PINS ON THE 4 PIN TRIGGER RECEPTACLE

IF THE SPOOLGUN RUNS BACKWARDS REVERSE THE RED AND BLACK WIRES ON THE SWITCH( NOT THE 4 PIN RECEPTACLE)

 

purchase here

Norstar Welder Tig  T200-AC/DC Tig Welder N820200TACDC 

Norstar Welder Tig  T200-AC/DC Tig Welder N820200TACDC

$ 724

Coplay Norstar Tig T200-AC/DC Dual Voltage Input TIG Welder Package

Enjoy all the features and benefits of major brand welders and more with the Coplay Norstar™ line of welders.The T200-ACDC TIG and Stick welder package comes ready to weld; simply add the flow meter and shielding gas.It offers infinite amperage control with an LED meter, AC balance control, and a remote amp receptacle, so you can set the machine to your required settings and use a foot control (sold separately).

Includes:

  • Tig T200 AC / DC Welder
  • 12.5″ Series WP17 Torch
  • Work Clamp & Cable
  • Electrode Holder & Cable
  • Input Power Cable

 

Specifications:

Tig (GTAW) and Stick (SMAW) Welding 

  • Input 115 /1 50/60 Hz. –  230/1 50/60 Hz.
  • Output DC 5-200amps
  • Output AC 12-200amps
  • OCV: 59V DC Max. 74V
  • Rated Output 140A/15.6v/60% 115V, 200A/18v/60% 230v
  • Dimensions: 17″H x 9″W x 18″D
  • Weight 45 lbs.

 

 

PURCHASE HERE

B & R Welder Repair Service Inc – Welding Workshops

B & R Welder Repair Service Inc –

4412 Southern Business Park Drive

White Plains, Md 20695

Welding Workshops started this month .  B & R is currently offering 1 , 2 and 3 days classes in Mig, Tig and Stick welding.  Beginners and advanced workshops available.

Welding in steel , stainless steel, aluminum materials.

Coming soon classes for Lincoln Pulse Mig for for material such as found on the new F150 trucks

Chrome Moly classes will start in Jan 2017

Begining in 2017 B & R will have a CWI on site to do welding certifications .

Call Bob Romero 240-270-7128 to register for classes

Hobart Handler 135 / 140 / 175 / 180 Spoolgun switch kit

On the Hobart Handlers 135 – 140-175 -180 models it is possible to hook up a Hobart Spoolrunner 100 spoolgun to your machine.

Basically you are removing the mig gun trigger wire and replacing it with a 4 pin connector ( like a miller ) . UNPLUG YOUR MACHINE BEFORE  INSTALLING THE KIT.

You are removing the 2 pin black spade connector inside the door ( where the trigger mig gun trigger wires go) and installing the new switch .  You have to drill and install a new 4 pin receptacle  either in the front of the machine ( some newer models have the cut out there but its covered by the nameplate ) . The two wires( trigger) that were connected to the black spade connector inside the door now go to pins 1 & 2 in the 4 pin receptacle . The red and black wires on the new switch go in pins 3 & 4 in the 4 pin receptacle . If the spoolgun runs backwards , reverse the red and black wires on the switch end , not the 4 pin receptacle .  Unplug the drive motor from the pc board and then take the switch two white pluge and plug them into the pc board ( where the drive motor plug came from) and the other plug on the switch goes into the drive motor plug . Remove the trigger wire spade connector from the mig gun and install the new 4 pin cord on the mig gun .   Make sure that there are no wires in the way of the fan blade inside the machine.

TO ORDER THIS PACKAGE 

 

Items need to hook up Hobart Spoolrunner 100 to Hobart Handler 135 & 175 ( only)

Will not work on Handler 187 OR OTHER MODELS

(You can hook up the spoolgun  and a miller style 300409 switch kit . If your Serial# is LC175022 and above ( with the 2 pin square drive motor plugs)
the switch plugs into the harness . If it is a lower serial number , you have to do some wiring , but not hard to do)

 

 

   

 

Millermatic 135 / 175 Spoolgun Switch 300409

The Millermatic 135 / 175 spoolgun switch 300409 is still available at  BRWELDINGSUPPLIES.COM . This switch allows a Norstar  spoolgun  Badger  or Miller Spoolmate 100 to be hooked up to the Millermatic 135 & 175  models after serial # LC175022 . Before that serial number you would have to cut the white plugs off and use butt connectors and hard wire the switch in.

NORSTAR BADGER SPOOLGUN AND MILLER SPOOLMATE 100  SWITCH FOR MILLERMATIC 135 & 175 MIG WELDERS

THIS KIT FITS THESE 2 MODELS 

REMOVE MM COVER 

UNPLUG THE DRIVE MOTOR FROM THE PC BOARD 

DRILL A HOLE FOR THE SWITCH INSIDE WHERE SHOWS

PLUG IN THE WHITE PLUGS ON THE SWITCH INTO THE PC BOARD AND THE DRIVE MOTOR PLUG

PLUG IN THE RED AND BLACK WIRES INTO THE EMPTY 2 PINS ON THE 4 PIN TRIGGER RECEPTACLE

IF THE SPOOLGUN RUNS BACKWARDS REVERSE THE RED AND BLACK WIRES ON THE SWITCH( NOT THE 4 PIN RECEPTACLE)

THIS IS NOT A MILLER SWITCH

(You can hook up the spoolgun  and a miller style 300409 switch kit . If your
Serial# is LC175022 and above ( with the 2 pin square drive motor plugs)
the switch plugs into the harness . If it is a lower serial number , you have to do some wiring , but not hard to do)

UTUBE VIDEO

 

Miller Syncrowave 210 AC/DC TIG Welder MIG Complete – (951616) FREE MIG PACKAGE

Limited Time Offer! MIG Complete Package Completely FREE with Purchase!

Add the MIG Complete Package at No Additional Cost!

Who? Anyone who purchases a Sycrowave 210.

What? Add the MIG Complete Package Absolutely Free! (Spoolmate 100 Spoolgun, MIG Expansion Kit, Two Feature Expansions) A $956 Value!

Where?This offer is only valid for online customers. BR Weldingsupplies.com is an Authorized Miller Retailer.

When? This offer is valid from December 28th Through March 31st.. If you have any questions or concerns, please contact us at 1-800-783-3073 to check availability

ACE ONE MAN FUME EXTRACTOR 73-200G

   ACE ONE MAN FUME EXTRACTOR 73-200G

 

 

The Ace Industrial Products Family of one man portable air filtration units lead the industry in selection. Our powerful units are designed for ease of use, functionality, and long life. Since 1962 we have set the standard for one man units.

At 37 lbs these light weight units will go anywhere. Designed for use in confined spaces and areas where portability is a must.

The one man portable quickly removes harmful air borne smoke and particulate from the breathing and work zone through the 10’ flexible hose and positioning arm with magnetic base. The large selection of filter combinations allow these units to effectively capture and remove air borne smoke, dust, fumes, grit or other contaminants from welding and other industrial processes.

73-200G One Man Portable industry benchmark air cleaning unit collects dust and smoke at the source. Polluted air is drawn away and filtered through a three stage filtration system. The dual powered fan system assures consistent and effective performance. The wide selection of filter combinations allow the unit to be used in a variety of applications. 

  • Effective 226 CFM ideal for light to medium duty use
  • Adjustable flexible arm with nozzle on magnetic base included
  • 10′ “unkinkable” hose included , extendable to 30′ with optional hose kits
  • Lightweight , portability for field work and tight locations
  • Built in spark trap extinguishes hot embers
  • Flexible filter combinations to meet a wide variety of work applications.
  • HEPA filteration available to virtually eliminate most hazardous compounds
  • Filter status light eliminates filter change guesswork
  • Includes 95 %  Main Filter and Pre filters:
    • 73-200G: 95% efficiency filter included for general welding fume protection

                               Optional

  • Optional Automatic on/off feature available
  • Optional t operator feature available
  • Optional caster kit available

_______________________________________________________

Specs:

Motor 14 amp ( 2@ 7 amps each)( 73-100 1 motor) 120v 

Airflow 226 cfm  ( 73-100 113 cfm)

Size 12″ Wide x 27 ” Long x 12″ High

Weight 40 Lbs

Filter Status  LED light

Construction  14 Ga and 16 Ga steel with finger latching , gasketed filter access door

 

 

PURCHASE HERE AT WWW.BRWELDER.COM

_____________________________________________________

Accessories (extra)

99-800

Power-Matic inductive switch, automatic on/off switching capability. 120 VA,15 Amp, 1 HP Max.

65015

8″ Round Nozzle

65016

Suction Cup Base

65018

Castor Kit

65036

20″ long Slot Nozzle

65038

Mobile Cart

65040

“T” Adaptor for use with dual arm

65041

Reducer for smoke extracting gun, 1 1/2″ O.D.